$a->strings["'%1\$s' has chosen to accept you a fan, which restricts some forms of communication - such as private messaging and some profile interactions. If this is a celebrity or community page, these settings were applied automatically."]="";
$a->strings["User registrations waiting for confirmation"]="";
$a->strings["Administration"]="";
$a->strings["Display Terms of Service"]="";
$a->strings["Enable the Terms of Service page. If this is enabled a link to the terms will be added to the registration form and the general information page."]="";
$a->strings["Display Privacy Statement"]="";
$a->strings["Show some informations regarding the needed information to operate the node according e.g. to <a href=\"%s\" target=\"_blank\">EU-GDPR</a>."]="";
$a->strings["Privacy Statement Preview"]="";
$a->strings["The Terms of Service"]="";
$a->strings["Enter the Terms of Service for your node here. You can use BBCode. Headers of sections should be [h2] and below."]="";
$a->strings["Save Settings"]="";
$a->strings["Blocked domain"]="";
$a->strings["The blocked domain"]="";
$a->strings["Reason for the block"]="";
$a->strings["The reason why you blocked this domain."]="";
$a->strings["Delete domain"]="";
$a->strings["Check to delete this entry from the blocklist"]="";
$a->strings["This page can be used to define a black list of servers from the federated network that are not allowed to interact with your node. For all entered domains you should also give a reason why you have blocked the remote server."]="";
$a->strings["The list of blocked servers will be made publically available on the /friendica page so that your users and people investigating communication problems can find the reason easily."]="";
$a->strings["Add new entry to block list"]="";
$a->strings["Server Domain"]="";
$a->strings["The domain of the new server to add to the block list. Do not include the protocol."]="";
$a->strings["Block reason"]="";
$a->strings["Add Entry"]="";
$a->strings["Save changes to the blocklist"]="";
$a->strings["Current Entries in the Blocklist"]="";
$a->strings["Delete entry from blocklist"]="";
$a->strings["Delete entry from blocklist?"]="";
$a->strings["Server added to blocklist."]="";
$a->strings["Site blocklist updated."]="";
$a->strings["The contact has been blocked from the node"]="";
$a->strings["Could not find any contact entry for this URL (%s)"]="";
$a->strings["URL of the remote contact to block."]="";
$a->strings["Delete this Item"]="";
$a->strings["On this page you can delete an item from your node. If the item is a top level posting, the entire thread will be deleted."]="";
$a->strings["You need to know the GUID of the item. You can find it e.g. by looking at the display URL. The last part of http://example.com/display/123456 is the GUID, here 123456."]="";
$a->strings["GUID"]="";
$a->strings["The GUID of the item you want to delete."]="";
$a->strings["Item marked for deletion."]="";
$a->strings["unknown"]="";
$a->strings["This page offers you some numbers to the known part of the federated social network your Friendica node is part of. These numbers are not complete but only reflect the part of the network your node is aware of."]="";
$a->strings["The <em>Auto Discovered Contact Directory</em> feature is not enabled, it will improve the data displayed here."]="";
$a->strings["Currently this node is aware of %d nodes with %d registered users from the following platforms:"]="";
$a->strings["ID"]="";
$a->strings["Recipient Name"]="";
$a->strings["Recipient Profile"]="";
$a->strings["Network"]="Nätverk";
$a->strings["Created"]="";
$a->strings["Last Tried"]="";
$a->strings["This page lists the content of the queue for outgoing postings. These are postings the initial delivery failed for. They will be resend later and eventually deleted if the delivery fails permanently."]="";
$a->strings["Inspect Deferred Worker Queue"]="";
$a->strings["This page lists the deferred worker jobs. This are jobs that couldn't be executed at the first time."]="";
$a->strings["Inspect Worker Queue"]="";
$a->strings["This page lists the currently queued worker jobs. These jobs are handled by the worker cronjob you've set up during install."]="";
$a->strings["Job Parameters"]="";
$a->strings["Priority"]="";
$a->strings["Your DB still runs with MyISAM tables. You should change the engine type to InnoDB. As Friendica will use InnoDB only features in the future, you should change this! See <a href=\"%s\">here</a> for a guide that may be helpful converting the table engines. You may also use the command <tt>php bin/console.php dbstructure toinnodb</tt> of your Friendica installation for an automatic conversion.<br />"]="";
$a->strings["There is a new version of Friendica available for download. Your current version is %1\$s, upstream version is %2\$s"]="";
$a->strings["The database update failed. Please run \"php bin/console.php dbstructure update\" from the command line and have a look at the errors that might appear."]="";
$a->strings["The worker was never executed. Please check your database structure!"]="";
$a->strings["The last worker execution was on %s UTC. This is older than one hour. Please check your crontab settings."]="";
$a->strings["Friendica's configuration now is stored in config/local.config.php, please copy config/local-sample.config.php and move your config from <code>.htconfig.php</code>. See <a href=\"%s\">the Config help page</a> for help with the transition."]="";
$a->strings["Friendica's configuration now is stored in config/local.config.php, please copy config/local-sample.config.php and move your config from <code>config/local.ini.php</code>. See <a href=\"%s\">the Config help page</a> for help with the transition."]="";
$a->strings["<a href=\"%s\">%s</a> is not reachable on your system. This is a severe configuration issue that prevents server to server communication. See <a href=\"%s\">the installation page</a> for help."]="";
$a->strings["Normal Account"]="Vanligt konto";
$a->strings["Automatic Follower Account"]="";
$a->strings["Public Forum Account"]="";
$a->strings["Automatic Friend Account"]="Konto med automatiskt godkännande av vänner.";
$a->strings["Blog Account"]="";
$a->strings["Private Forum Account"]="";
$a->strings["Message queues"]="";
$a->strings["Server Settings"]="";
$a->strings["Summary"]="";
$a->strings["Registered users"]="";
$a->strings["Pending registrations"]="";
$a->strings["Version"]="";
$a->strings["Active addons"]="";
$a->strings["Can not parse base url. Must have at least <scheme>://<domain>"]="";
$a->strings["Site settings updated."]="";
$a->strings["No special theme for mobile devices"]="";
$a->strings["No community page for local users"]="";
$a->strings["No community page"]="";
$a->strings["Public postings from users of this site"]="";
$a->strings["Public postings from the federated network"]="";
$a->strings["Public postings from local users and the federated network"]="";
$a->strings["Disabled"]="";
$a->strings["Users, Global Contacts"]="";
$a->strings["Users, Global Contacts/fallback"]="";
$a->strings["One month"]="";
$a->strings["Three months"]="";
$a->strings["Half a year"]="";
$a->strings["One year"]="";
$a->strings["Multi user instance"]="";
$a->strings["Closed"]="";
$a->strings["Requires approval"]="";
$a->strings["Open"]="";
$a->strings["No SSL policy, links will track page SSL state"]="";
$a->strings["Force all links to use SSL"]="";
$a->strings["Self-signed certificate, use SSL for local links only (discouraged)"]="";
$a->strings["Warning! Advanced function. Could make this server unreachable."]="";
$a->strings["Site name"]="";
$a->strings["Host name"]="";
$a->strings["Sender Email"]="";
$a->strings["The email address your server shall use to send notification emails from."]="";
$a->strings["Banner/Logo"]="";
$a->strings["Shortcut icon"]="";
$a->strings["Link to an icon that will be used for browsers."]="";
$a->strings["Touch icon"]="";
$a->strings["Link to an icon that will be used for tablets and mobiles."]="";
$a->strings["Additional Info"]="";
$a->strings["For public servers: you can add additional information here that will be listed at %s/servers."]="";
$a->strings["System language"]="";
$a->strings["System theme"]="";
$a->strings["Default system theme - may be over-ridden by user profiles - <a href='#' id='cnftheme'>change theme settings</a>"]="";
$a->strings["Mobile system theme"]="";
$a->strings["Theme for mobile devices"]="";
$a->strings["SSL link policy"]="";
$a->strings["Determines whether generated links should be forced to use SSL"]="";
$a->strings["Force SSL"]="";
$a->strings["Force all Non-SSL requests to SSL - Attention: on some systems it could lead to endless loops."]="";
$a->strings["Hide help entry from navigation menu"]="";
$a->strings["Hides the menu entry for the Help pages from the navigation menu. You can still access it calling /help directly."]="";
$a->strings["Single user instance"]="";
$a->strings["Make this instance multi-user or single-user for the named user"]="";
$a->strings["File storage backend"]="";
$a->strings["The backend used to store uploaded data. If you change the storage backend, you can manually move the existing files. If you do not do so, the files uploaded before the change will still be available at the old backend. Please see <a href=\"/help/Settings#1_2_3_1\">the settings documentation</a> for more information about the choices and the moving procedure."]="";
$a->strings["Maximum image size"]="";
$a->strings["Maximum size in bytes of uploaded images. Default is 0, which means no limits."]="";
$a->strings["Maximum image length"]="";
$a->strings["Maximum length in pixels of the longest side of uploaded images. Default is -1, which means no limits."]="";
$a->strings["JPEG image quality"]="";
$a->strings["Uploaded JPEGS will be saved at this quality setting [0-100]. Default is 100, which is full quality."]="";
$a->strings["Register policy"]="";
$a->strings["Maximum Daily Registrations"]="";
$a->strings["If registration is permitted above, this sets the maximum number of new user registrations to accept per day. If register is set to closed, this setting has no effect."]="";
$a->strings["Register text"]="";
$a->strings["Will be displayed prominently on the registration page. You can use BBCode here."]="";
$a->strings["Forbidden Nicknames"]="";
$a->strings["Comma separated list of nicknames that are forbidden from registration. Preset is a list of role names according RFC 2142."]="";
$a->strings["Accounts abandoned after x days"]="";
$a->strings["Will not waste system resources polling external sites for abandonded accounts. Enter 0 for no time limit."]="";
$a->strings["Allowed friend domains"]="";
$a->strings["Comma separated list of domains which are allowed to establish friendships with this site. Wildcards are accepted. Empty to allow any domains"]="";
$a->strings["Allowed email domains"]="";
$a->strings["Comma separated list of domains which are allowed in email addresses for registrations to this site. Wildcards are accepted. Empty to allow any domains"]="";
$a->strings["No OEmbed rich content"]="";
$a->strings["Don't show the rich content (e.g. embedded PDF), except from the domains listed below."]="";
$a->strings["Allowed OEmbed domains"]="";
$a->strings["Comma separated list of domains which oembed content is allowed to be displayed. Wildcards are accepted."]="";
$a->strings["Block public"]="";
$a->strings["Check to block public access to all otherwise public personal pages on this site unless you are currently logged in."]="";
$a->strings["Force publish"]="";
$a->strings["Check to force all profiles on this site to be listed in the site directory."]="";
$a->strings["Enabling this may violate privacy laws like the GDPR"]="";
$a->strings["Global directory URL"]="";
$a->strings["URL to the global directory. If this is not set, the global directory is completely unavailable to the application."]="";
$a->strings["Private posts by default for new users"]="";
$a->strings["Set default post permissions for all new members to the default privacy group rather than public."]="";
$a->strings["Don't include post content in email notifications"]="";
$a->strings["Don't include the content of a post/comment/private message/etc. in the email notifications that are sent out from this site, as a privacy measure."]="";
$a->strings["Disallow public access to addons listed in the apps menu."]="";
$a->strings["Checking this box will restrict addons listed in the apps menu to members only."]="";
$a->strings["Don't embed private images in posts"]="";
$a->strings["Don't replace locally-hosted private photos in posts with an embedded copy of the image. This means that contacts who receive posts containing private photos will have to authenticate and load each image, which may take a while."]="";
$a->strings["Explicit Content"]="";
$a->strings["Set this to announce that your node is used mostly for explicit content that might not be suited for minors. This information will be published in the node information and might be used, e.g. by the global directory, to filter your node from listings of nodes to join. Additionally a note about this will be shown at the user registration page."]="";
$a->strings["Allow Users to set remote_self"]="";
$a->strings["With checking this, every user is allowed to mark every contact as a remote_self in the repair contact dialog. Setting this flag on a contact causes mirroring every posting of that contact in the users stream."]="";
$a->strings["Block multiple registrations"]="";
$a->strings["Disallow users to register additional accounts for use as pages."]="";
$a->strings["Disable OpenID"]="";
$a->strings["Disable OpenID support for registration and logins."]="";
$a->strings["No Fullname check"]="";
$a->strings["Allow users to register without a space between the first name and the last name in their full name."]="";
$a->strings["Community pages for visitors"]="";
$a->strings["Which community pages should be available for visitors. Local users always see both pages."]="";
$a->strings["Posts per user on community page"]="";
$a->strings["The maximum number of posts per user on the community page. (Not valid for 'Global Community')"]="";
$a->strings["Disable OStatus support"]="";
$a->strings["Disable built-in OStatus (StatusNet, GNU Social etc.) compatibility. All communications in OStatus are public, so privacy warnings will be occasionally displayed."]="";
$a->strings["Only import OStatus/ActivityPub threads from our contacts"]="";
$a->strings["Normally we import every content from our OStatus and ActivityPub contacts. With this option we only store threads that are started by a contact that is known on our system."]="";
$a->strings["OStatus support can only be enabled if threading is enabled."]="";
$a->strings["Diaspora support can't be enabled because Friendica was installed into a sub directory."]="";
$a->strings["All contacts must use Friendica protocols. All other built-in communication protocols disabled."]="";
$a->strings["Verify SSL"]="";
$a->strings["If you wish, you can turn on strict certificate checking. This will mean you cannot connect (at all) to self-signed SSL sites."]="";
$a->strings["Proxy user"]="";
$a->strings["Proxy URL"]="";
$a->strings["Network timeout"]="";
$a->strings["Value is in seconds. Set to 0 for unlimited (not recommended)."]="";
$a->strings["Maximum Load Average"]="";
$a->strings["Maximum system load before delivery and poll processes are deferred - default 50."]="";
$a->strings["Maximum Load Average (Frontend)"]="";
$a->strings["Maximum system load before the frontend quits service - default 50."]="";
$a->strings["Minimal Memory"]="";
$a->strings["Minimal free memory in MB for the worker. Needs access to /proc/meminfo - default 0 (deactivated)."]="";
$a->strings["Maximum table size for optimization"]="";
$a->strings["Maximum table size (in MB) for the automatic optimization. Enter -1 to disable it."]="";
$a->strings["Minimum level of fragmentation"]="";
$a->strings["Minimum fragmenation level to start the automatic optimization - default value is 30%."]="";
$a->strings["Periodical check of global contacts"]="";
$a->strings["If enabled, the global contacts are checked periodically for missing or outdated data and the vitality of the contacts and servers."]="";
$a->strings["Days between requery"]="";
$a->strings["Number of days after which a server is requeried for his contacts."]="";
$a->strings["Discover contacts from other servers"]="";
$a->strings["Periodically query other servers for contacts. You can choose between 'users': the users on the remote system, 'Global Contacts': active contacts that are known on the system. The fallback is meant for Redmatrix servers and older friendica servers, where global contacts weren't available. The fallback increases the server load, so the recommended setting is 'Users, Global Contacts'."]="";
$a->strings["Timeframe for fetching global contacts"]="";
$a->strings["When the discovery is activated, this value defines the timeframe for the activity of the global contacts that are fetched from other servers."]="";
$a->strings["Search the local directory"]="";
$a->strings["Search the local directory instead of the global directory. When searching locally, every search will be executed on the global directory in the background. This improves the search results when the search is repeated."]="";
$a->strings["Publish server information"]="";
$a->strings["If enabled, general server and usage data will be published. The data contains the name and version of the server, number of users with public profiles, number of posts and the activated protocols and connectors. See <a href='http://the-federation.info/'>the-federation.info</a> for details."]="";
$a->strings["Check upstream version"]="";
$a->strings["Enables checking for new Friendica versions at github. If there is a new version, you will be informed in the admin panel overview."]="";
$a->strings["Suppress Tags"]="";
$a->strings["Suppress showing a list of hashtags at the end of the posting."]="";
$a->strings["Clean database"]="";
$a->strings["Remove old remote items, orphaned database records and old content from some other helper tables."]="";
$a->strings["Lifespan of remote items"]="";
$a->strings["When the database cleanup is enabled, this defines the days after which remote items will be deleted. Own items, and marked or filed items are always kept. 0 disables this behaviour."]="";
$a->strings["Lifespan of unclaimed items"]="";
$a->strings["When the database cleanup is enabled, this defines the days after which unclaimed remote items (mostly content from the relay) will be deleted. Default value is 90 days. Defaults to the general lifespan value of remote items if set to 0."]="";
$a->strings["Lifespan of raw conversation data"]="";
$a->strings["The conversation data is used for ActivityPub and OStatus, as well as for debug purposes. It should be safe to remove it after 14 days, default is 90 days."]="";
$a->strings["Path to item cache"]="";
$a->strings["The item caches buffers generated bbcode and external images."]="";
$a->strings["Cache duration in seconds"]="";
$a->strings["How long should the cache files be hold? Default value is 86400 seconds (One day). To disable the item cache, set the value to -1."]="";
$a->strings["Maximum numbers of comments per post"]="";
$a->strings["How much comments should be shown for each post? Default value is 100."]="";
$a->strings["Temp path"]="";
$a->strings["If you have a restricted system where the webserver can't access the system temp path, enter another path here."]="";
$a->strings["Base path to installation"]="";
$a->strings["If the system cannot detect the correct path to your installation, enter the correct path here. This setting should only be set if you are using a restricted system and symbolic links to your webroot."]="";
$a->strings["Disable picture proxy"]="";
$a->strings["The picture proxy increases performance and privacy. It shouldn't be used on systems with very low bandwidth."]="";
$a->strings["Only search in tags"]="";
$a->strings["On large systems the text search can slow down the system extremely."]="";
$a->strings["New base url"]="";
$a->strings["Change base url for this server. Sends relocate message to all Friendica and Diaspora* contacts of all users."]="";
$a->strings["RINO Encryption"]="";
$a->strings["Encryption layer between nodes."]="";
$a->strings["Enabled"]="";
$a->strings["Maximum number of parallel workers"]="";
$a->strings["On shared hosters set this to %d. On larger systems, values of %d are great. Default value is %d."]="";
$a->strings["Don't use 'proc_open' with the worker"]="";
$a->strings["Enable this if your system doesn't allow the use of 'proc_open'. This can happen on shared hosters. If this is enabled you should increase the frequency of worker calls in your crontab."]="";
$a->strings["Enable fastlane"]="";
$a->strings["When enabed, the fastlane mechanism starts an additional worker if processes with higher priority are blocked by processes of lower priority."]="";
$a->strings["Enable frontend worker"]="";
$a->strings["When enabled the Worker process is triggered when backend access is performed \\x28e.g. messages being delivered\\x29. On smaller sites you might want to call %s/worker on a regular basis via an external cron job. You should only enable this option if you cannot utilize cron/scheduled jobs on your server."]="";
$a->strings["Subscribe to relay"]="";
$a->strings["Enables the receiving of public posts from the relay. They will be included in the search, subscribed tags and on the global community page."]="";
$a->strings["Relay server"]="";
$a->strings["Address of the relay server where public posts should be send to. For example https://relay.diasp.org"]="";
$a->strings["Direct relay transfer"]="";
$a->strings["Enables the direct transfer to other servers without using the relay servers"]="";
$a->strings["Relay scope"]="";
$a->strings["Can be 'all' or 'tags'. 'all' means that every public post should be received. 'tags' means that only posts with selected tags should be received."]="";
$a->strings["all"]="";
$a->strings["tags"]="";
$a->strings["Server tags"]="";
$a->strings["Comma separated list of tags for the 'tags' subscription."]="";
$a->strings["Allow user tags"]="";
$a->strings["If enabled, the tags from the saved searches will used for the 'tags' subscription in addition to the 'relay_server_tags'."]="";
$a->strings["Start Relocation"]="";
$a->strings["Update has been marked successful"]="";
$a->strings["Database structure update %s was successfully applied."]="";
$a->strings["Executing of database structure update %s failed with error: %s"]="";
$a->strings["Executing %s failed with error: %s"]="";
$a->strings["Update %s was successfully applied."]="";
$a->strings["Update %s did not return a status. Unknown if it succeeded."]="";
$a->strings["There was no additional update function %s that needed to be called."]="";
$a->strings["No failed updates."]="";
$a->strings["Check database structure"]="";
$a->strings["Failed Updates"]="";
$a->strings["This does not include updates prior to 1139, which did not return a status."]="";
$a->strings["Mark success (if update was manually applied)"]="";
$a->strings["Attempt to execute this update step automatically"]="";
$a->strings["\n\t\t\tDear %1\$s,\n\t\t\t\tthe administrator of %2\$s has set up an account for you."]="";
$a->strings["\n\t\t\tThe login details are as follows:\n\n\t\t\tSite Location:\t%1\$s\n\t\t\tLogin Name:\t\t%2\$s\n\t\t\tPassword:\t\t%3\$s\n\n\t\t\tYou may change your password from your account \"Settings\" page after logging\n\t\t\tin.\n\n\t\t\tPlease take a few moments to review the other account settings on that page.\n\n\t\t\tYou may also wish to add some basic information to your default profile\n\t\t\t(on the \"Profiles\" page) so that other people can easily find you.\n\n\t\t\tWe recommend setting your full name, adding a profile photo,\n\t\t\tadding some profile \"keywords\" (very useful in making new friends) - and\n\t\t\tperhaps what country you live in; if you do not wish to be more specific\n\t\t\tthan that.\n\n\t\t\tWe fully respect your right to privacy, and none of these items are necessary.\n\t\t\tIf you are new and do not know anybody here, they may help\n\t\t\tyou to make some new and interesting friends.\n\n\t\t\tIf you ever want to delete your account, you can do so at %1\$s/removeme\n\n\t\t\tThank you and welcome to %4\$s."]="";
$a->strings["Selected users will be deleted!\\n\\nEverything these users had posted on this site will be permanently deleted!\\n\\nAre you sure?"]="";
$a->strings["The user {0} will be deleted!\\n\\nEverything this user has posted on this site will be permanently deleted!\\n\\nAre you sure?"]="";
$a->strings["Name of the new user."]="";
$a->strings["Nickname"]="";
$a->strings["Nickname of the new user."]="";
$a->strings["Email address of the new user."]="";
$a->strings["Addon %s disabled."]="";
$a->strings["Addon %s enabled."]="";
$a->strings["Disable"]="";
$a->strings["Enable"]="";
$a->strings["Toggle"]="";
$a->strings["Settings"]="Inställningar";
$a->strings["Author: "]="";
$a->strings["Maintainer: "]="";
$a->strings["Reload active addons"]="";
$a->strings["There are currently no addons available on your node. You can find the official addon repository at %1\$s and might find other interesting addons in the open addon registry at %2\$s"]="";
$a->strings["No themes found."]="";
$a->strings["Screenshot"]="";
$a->strings["Reload active themes"]="";
$a->strings["No themes found on the system. They should be placed in %1\$s"]="";
$a->strings["[Experimental]"]="";
$a->strings["[Unsupported]"]="";
$a->strings["Log settings updated."]="";
$a->strings["PHP log currently enabled."]="";
$a->strings["PHP log currently disabled."]="";
$a->strings["Clear"]="";
$a->strings["Enable Debugging"]="";
$a->strings["Log file"]="";
$a->strings["Must be writable by web server. Relative to your Friendica top-level directory."]="";
$a->strings["Log level"]="";
$a->strings["PHP logging"]="";
$a->strings["To temporarily enable logging of PHP errors and warnings you can prepend the following to the index.php file of your installation. The filename set in the 'error_log' line is relative to the friendica top-level directory and must be writeable by the web server. The option '1' for 'log_errors' and 'display_errors' is to enable these options, set to '0' to disable them."]="";
$a->strings["Error trying to open <strong>%1\$s</strong> log file.\\r\\n<br/>Check to see if file %1\$s exist and is readable."]="";
$a->strings["Couldn't open <strong>%1\$s</strong> log file.\\r\\n<br/>Check to see if file %1\$s is readable."]="";
$a->strings["Page not found."]="Sidan hittades inte.";
$a->strings["Access to this profile has been restricted."]="";
$a->strings["Events"]="";
$a->strings["View"]="";
$a->strings["Previous"]="";
$a->strings["Next"]="";
$a->strings["today"]="";
$a->strings["month"]="månad";
$a->strings["week"]="vecka";
$a->strings["day"]="dag";
$a->strings["list"]="";
$a->strings["User not found"]="";
$a->strings["This calendar format is not supported"]="";
$a->strings["No exportable data found"]="";
$a->strings["calendar"]="";
$a->strings["No contacts in common."]="";
$a->strings["Common Friends"]="";
$a->strings["Public access denied."]="";
$a->strings["Community option not available."]="";
$a->strings["Not available."]="";
$a->strings["Local Community"]="";
$a->strings["Posts from local users on this server"]="";
$a->strings["Global Community"]="";
$a->strings["Posts from users of the whole federated network"]="";
$a->strings["No results."]="Inga resultat.";
$a->strings["This community stream shows all public posts received by this node. They may not reflect the opinions of this node’s users."]="";
$a->strings["Credits"]="";
$a->strings["Friendica is a community project, that would not be possible without the help of many people. Here is a list of those who have contributed to the code or the translation of Friendica. Thank you all!"]="";
$a->strings["Contact settings applied."]="Inställningar för kontakter har sparats.";
$a->strings["Contact update failed."]="Det gick inte att uppdatera kontakt.";
$a->strings["Contact not found."]="Kontakten hittades inte.";
$a->strings["<strong>WARNING: This is highly advanced</strong> and if you enter incorrect information your communications with this contact may stop working."]="";
$a->strings["Please use your browser 'Back' button <strong>now</strong> if you are uncertain what to do on this page."]="Använd webbläsarens bakåtknapp <strong>nu</strong> om du är osäker på vad man gör på den här sidan.";
$a->strings["No mirroring"]="";
$a->strings["Mirror as forwarded posting"]="";
$a->strings["Mirror as my own posting"]="";
$a->strings["Return to contact editor"]="";
$a->strings["Refetch contact data"]="";
$a->strings["Submit"]="Spara";
$a->strings["Remote Self"]="";
$a->strings["Mirror postings from this contact"]="";
$a->strings["Mark this contact as remote_self, this will cause friendica to repost new entries from this contact."]="";
$a->strings["Please enter the password of the parent account to legitimize your request."]="";
$a->strings["Parent User"]="";
$a->strings["Parent users have total control about this account, including the account settings. Please double check whom you give this access."]="";
$a->strings["Delegate Page Management"]="";
$a->strings["Delegates"]="";
$a->strings["Delegates are able to manage all aspects of this account/page except for basic account settings. Please do not delegate your personal account to anybody that you do not trust completely."]="";
$a->strings["Existing Page Delegates"]="";
$a->strings["Potential Delegates"]="";
$a->strings["Remove"]="Ta bort";
$a->strings["Add"]="";
$a->strings["No entries."]="";
$a->strings["Profile not found."]="Profilen hittades inte.";
$a->strings["This may occasionally happen if contact was requested by both persons and it has already been approved."]="";
$a->strings["Response from remote site was not understood."]="Kunde inte tolka svaret från fjärrsajten.";
$a->strings["Unexpected response from remote site: "]="Oväntat svar från fjärrsajten: ";
$a->strings["Temporary failure. Please wait and try again."]="Tillfälligt fel. Försök igen lite senare.";
$a->strings["Introduction failed or was revoked."]="Kontaktförfrågan gick inte fram eller har återkallats.";
$a->strings["Remote site reported: "]="Meddelande från fjärrsajten: ";
$a->strings["Unable to set contact photo."]="Det gick inte att byta profilbild.";
$a->strings["No user record found for '%s' "]="";
$a->strings["Our site encryption key is apparently messed up."]="Det är något fel på webbplatsens krypteringsnyckel.";
$a->strings["Empty site URL was provided or URL could not be decrypted by us."]="Empty site URL was provided or URL could not be decrypted by us.";
$a->strings["Contact record was not found for you on our site."]="Det gick inte att hitta efterfrågad information på vår webbplats.";
$a->strings["Site public key not available in contact record for URL %s."]="";
$a->strings["The ID provided by your system is a duplicate on our system. It should work if you try again."]="Det ID som angavs av ditt system är samma som på vårt system. Det borde fungera om du provar igen.";
$a->strings["Unable to set your contact credentials on our system."]="Unable to set your contact credentials on our system.";
$a->strings["Unable to update your contact profile details on our system"]="Unable to update your contact profile details on our system";
$a->strings["[Name Withheld]"]="[Namnet visas inte]";
$a->strings["%1\$s welcomes %2\$s"]="";
$a->strings["This introduction has already been accepted."]="Den här förfrågan har redan beviljats.";
$a->strings["Profile location is not valid or does not contain profile information."]="Profiladressen är ogiltig eller innehåller ingen profilinformation.";
$a->strings["Warning: profile location has no identifiable owner name."]="Varning! Hittar inget namn som identifierar profilen.";
$a->strings["Warning: profile location has no profile photo."]="Varning! Profilen innehåller inte någon profilbild.";
$a->strings["%d required parameter was not found at the given location"]=[
0=>"%d required parameter was not found at the given location",
1=>"%d required parameters were not found at the given location",
];
$a->strings["Introduction complete."]="Kontaktförfrågan/Presentationen är klar.";
$a->strings["Failed to update contact record."]="Det blev fel när kontakten skulle uppdateras.";
$a->strings["Your introduction has been sent."]="Kontaktförfrågan/Presentationen har skickats.";
$a->strings["Remote subscription can't be done for your network. Please subscribe directly on your system."]="";
$a->strings["Please login to confirm introduction."]="Logga in för att acceptera förfrågan.";
$a->strings["Incorrect identity currently logged in. Please login to <strong>this</strong> profile."]="Inloggad med fel identitet. Logga in med <strong>den här</strong> profilen.";
$a->strings["Confirm"]="Bekräfta";
$a->strings["Hide this contact"]="";
$a->strings["Welcome home %s."]="Välkommen hem %s.";
$a->strings["Please confirm your introduction/connection request to %s."]="Bekräfta att du vill skicka kontaktförfrågan till %s.";
$a->strings["Please enter your 'Identity Address' from one of the following supported communications networks:"]="";
$a->strings["If you are not yet a member of the free social web, <a href=\"%s\">follow this link to find a public Friendica site and join us today</a>."]="";
$a->strings["Friend/Connection Request"]="Vän- eller kontaktförfrågan";
$a->strings["You have no more invitations available"]="";
$a->strings["Visit %s for a list of public sites that you can join. Friendica members on other sites can all connect with each other, as well as with members of many other social networks."]="";
$a->strings["To accept this invitation, please visit and register at %s or any other public Friendica website."]="";
$a->strings["Friendica sites all inter-connect to create a huge privacy-enhanced social web that is owned and controlled by its members. They can also connect with many traditional social networks. See %s for a list of alternate Friendica sites you can join."]="";
$a->strings["Our apologies. This system is not currently configured to connect with other public sites or invite members."]="";
$a->strings["Friendica sites all inter-connect to create a huge privacy-enhanced social web that is owned and controlled by its members. They can also connect with many traditional social networks."]="";
$a->strings["To accept this invitation, please visit and register at %s."]="";
$a->strings["Once you have registered, please connect with me via my profile page at:"]="Vi kan bli kontakter via min profil. Besök min profil här när du har registrerat dig:";
$a->strings["For more information about the Friendica project and why we feel it is important, please visit http://friendi.ca"]="";
$a->strings["Unable to locate original post."]="Hittar inte det ursprungliga inlägget.";
$a->strings["Empty post discarded."]="Tomt inlägg. Inte sparat.";
$a->strings["This message was sent to you by %s, a member of the Friendica social network."]="";
$a->strings["You may visit them online at %s"]="";
$a->strings["Please contact the sender by replying to this post if you do not wish to receive these messages."]="Kontakta avsändaren genom att svara på det här meddelandet om du inte vill ha sådana här meddelanden.";
$a->strings["%s posted an update."]="%s har gjort ett inlägg.";
$a->strings["l F d, Y \\@ g:i A"]="";
$a->strings["Time Conversion"]="";
$a->strings["Friendica provides this service for sharing events with other networks and friends in unknown timezones."]="";
$a->strings["UTC time: %s"]="";
$a->strings["Current timezone: %s"]="";
$a->strings["Converted localtime: %s"]="";
$a->strings["Please select your timezone:"]="";
$a->strings["Remote privacy information not available."]="Remote privacy information not available.";
$a->strings["Visible to:"]="Synlig för:";
$a->strings["No valid account found."]="";
$a->strings["Password reset request issued. Check your email."]="Nytt lösenord har begärts. Kolla din mail.";
$a->strings["\n\t\tDear %1\$s,\n\t\t\tA request was recently received at \"%2\$s\" to reset your account\n\t\tpassword. In order to confirm this request, please select the verification link\n\t\tbelow or paste it into your web browser address bar.\n\n\t\tIf you did NOT request this change, please DO NOT follow the link\n\t\tprovided and ignore and/or delete this email, the request will expire shortly.\n\n\t\tYour password will not be changed unless we can verify that you\n\t\tissued this request."]="";
$a->strings["\n\t\tFollow this link soon to verify your identity:\n\n\t\t%1\$s\n\n\t\tYou will then receive a follow-up message containing the new password.\n\t\tYou may change that password from your account settings page after logging in.\n\n\t\tThe login details are as follows:\n\n\t\tSite Location:\t%2\$s\n\t\tLogin Name:\t%3\$s"]="";
$a->strings["Password reset requested at %s"]="Nytt lösenord på %s har begärts";
$a->strings["Request could not be verified. (You may have previously submitted it.) Password reset failed."]="Begäran kunde inte verifieras. (Du kanske redan skickat den?) Det gick inte att byta lösenord.";
$a->strings["Request has expired, please make a new one."]="";
$a->strings["Forgot your Password?"]="Glömt lösenordet?";
$a->strings["Enter your email address and submit to have your password reset. Then check your email for further instructions."]="Ange din e-postadress för att få ett nytt lösenord. Du kommer att få ett meddelande med vidare instruktioner via e-post.";
$a->strings["Nickname or Email: "]="Användarnamn eller e-post:";
$a->strings["Your password has been reset as requested."]="Nu har du fått ett nytt lösenord.";
$a->strings["Your new password is"]="Det nya lösenordet är";
$a->strings["Save or copy your new password - and then"]="Spara eller kopiera lösenordet och";
$a->strings["click here to login"]="klicka här för att logga in";
$a->strings["Your password may be changed from the <em>Settings</em> page after successful login."]="När du loggat in kan du byta lösenord på sidan <em>Inställningar</em>.";
$a->strings["\n\t\t\tDear %1\$s,\n\t\t\t\tYour password has been changed as requested. Please retain this\n\t\t\tinformation for your records (or change your password immediately to\n\t\t\tsomething that you will remember).\n\t\t"]="";
$a->strings["\n\t\t\tYour login details are as follows:\n\n\t\t\tSite Location:\t%1\$s\n\t\t\tLogin Name:\t%2\$s\n\t\t\tPassword:\t%3\$s\n\n\t\t\tYou may change that password from your account settings page after logging in.\n\t\t"]="";
$a->strings["Your password has been changed at %s"]="";
$a->strings["System down for maintenance"]="";
$a->strings["Manage Identities and/or Pages"]="Hantera identiteter eller sidor";
$a->strings["Toggle between different identities or community/group pages which share your account details or which you have been granted \"manage\" permissions"]="";
$a->strings["Select an identity to manage: "]="Välj vilken identitet du vill hantera: ";
$a->strings["No keywords to match. Please add keywords to your default profile."]="";
$a->strings["first"]="första";
$a->strings["next"]="nästa";
$a->strings["Profile Match"]="Matcha profiler";
$a->strings["New Message"]="Nytt meddelande";
$a->strings["No recipient selected."]="Ingen mottagare har valts.";
$a->strings["Unable to locate contact information."]="Det gick inte att hitta kontaktuppgifterna.";
$a->strings["Message could not be sent."]="Det gick inte att skicka meddelandet.";
$a->strings["Message collection failure."]="";
$a->strings["Message sent."]="Meddelandet har skickats.";
$a->strings["Discard"]="Ta bort";
$a->strings["Messages"]="Meddelanden";
$a->strings["Do you really want to delete this message?"]="";
$a->strings["Conversation not found."]="";
$a->strings["Message deleted."]="Meddelandet togs bort.";
$a->strings["Conversation removed."]="Konversationen togs bort.";
$a->strings["Please enter a link URL:"]="Ange en länk (URL):";
$a->strings["We would like to offer some tips and links to help make your experience enjoyable. Click any item to visit the relevant page. A link to this page will be visible from your home page for two weeks after your initial registration and then will quietly disappear."]="";
$a->strings["Getting Started"]="";
$a->strings["Friendica Walk-Through"]="";
$a->strings["On your <em>Quick Start</em> page - find a brief introduction to your profile and network tabs, make some new connections, and find some groups to join."]="";
$a->strings["Go to Your Settings"]="";
$a->strings["On your <em>Settings</em> page - change your initial password. Also make a note of your Identity Address. This looks just like an email address - and will be useful in making friends on the free social web."]="";
$a->strings["Review the other settings, particularly the privacy settings. An unpublished directory listing is like having an unlisted phone number. In general, you should probably publish your listing - unless all of your friends and potential friends know exactly how to find you."]="";
$a->strings["Upload Profile Photo"]="Ladda upp profilbild";
$a->strings["Upload a profile photo if you have not done so already. Studies have shown that people with real photos of themselves are ten times more likely to make friends than people who do not."]="";
$a->strings["Edit Your Profile"]="";
$a->strings["Edit your <strong>default</strong> profile to your liking. Review the settings for hiding your list of friends and hiding the profile from unknown visitors."]="";
$a->strings["Profile Keywords"]="";
$a->strings["Set some public keywords for your default profile which describe your interests. We may be able to find other people with similar interests and suggest friendships."]="";
$a->strings["Connecting"]="";
$a->strings["Importing Emails"]="";
$a->strings["Enter your email access information on your Connector Settings page if you wish to import and interact with friends or mailing lists from your email INBOX"]="";
$a->strings["Go to Your Contacts Page"]="";
$a->strings["Your Contacts page is your gateway to managing friendships and connecting with friends on other networks. Typically you enter their address or site URL in the <em>Add New Contact</em> dialog."]="";
$a->strings["Go to Your Site's Directory"]="";
$a->strings["The Directory page lets you find other people in this network or other federated sites. Look for a <em>Connect</em> or <em>Follow</em> link on their profile page. Provide your own Identity Address if requested."]="";
$a->strings["Finding New People"]="";
$a->strings["On the side panel of the Contacts page are several tools to find new friends. We can match people by interest, look up people by name or interest, and provide suggestions based on network relationships. On a brand new site, friend suggestions will usually begin to be populated within 24 hours."]="";
$a->strings["Once you have made some friends, organize them into private conversation groups from the sidebar of your Contacts page and then you can interact with each group privately on your Network page."]="";
$a->strings["Why Aren't My Posts Public?"]="";
$a->strings["Friendica respects your privacy. By default, your posts will only show up to people you've added as friends. For more information, see the help section from the link above."]="";
$a->strings["Getting Help"]="";
$a->strings["Go to the Help Section"]="";
$a->strings["Our <strong>help</strong> pages may be consulted for detail on other program features and resources."]="";
$a->strings["This is your <strong>public</strong> profile.<br />It <strong>may</strong> be visible to anybody using the internet."]="Det här är din <strong>offentliga</strong> profil.<br />Den <strong>kan vara synlig för vem som helst</strong> på internet.";
$a->strings["Your Full Name:"]="Fullständigt namn:";
$a->strings["Profile Visibility Editor"]="Ända vilka som ska kunna se profil";
$a->strings["Visible To"]="Synlig för";
$a->strings["All Contacts (with secure profile access)"]="Alla kontakter (med säker tillgång till din profil)";
$a->strings["Account approved."]="Kontot har godkänts.";
$a->strings["Registration revoked for %s"]="";
$a->strings["Please login."]="Logga in.";
$a->strings["User deleted their account"]="";
$a->strings["On your Friendica node an user deleted their account. Please ensure that their data is removed from the backups."]="";
$a->strings["The user id is %d"]="";
$a->strings["Remove My Account"]="Ta bort mitt konto";
$a->strings["This will completely remove your account. Once this has been done it is not recoverable."]="Detta kommer att ta bort kontot helt och hållet. Efter att det är gjort går det inte att återställa.";
$a->strings["Please enter your password for verification:"]="Ange lösenordet igen för säkerhets skull:";
$a->strings["Resubscribing to OStatus contacts"]="";
$a->strings["Error"]="";
$a->strings["Only logged in users are permitted to perform a search."]="";
$a->strings["Too Many Requests"]="";
$a->strings["Only one search per minute is permitted for not logged in users."]="";
$a->strings["Users on networks like Mastodon or Pleroma are able to set a content warning field which collapse their post by default. This disables the automatic collapsing and sets the content warning as the post title. Doesn't affect any other content filtering you eventually set up."]="";
$a->strings["Normally the system tries to find the best link to add to shortened posts. If this option is enabled then every shortened post will always point to the original friendica post."]="";
$a->strings["Automatically follow any GNU Social (OStatus) followers/mentioners"]="";
$a->strings["If you receive a message from an unknown OStatus user, this option decides what to do. If it is checked, a new contact will be created for every unknown user."]="";
$a->strings["Default group for OStatus contacts"]="";
$a->strings["Your legacy GNU Social account"]="";
$a->strings["If you enter your old GNU Social/Statusnet account name here (in the format user@domain.tld), your contacts will be added automatically. The field will be emptied when done."]="";
$a->strings["Repair OStatus subscriptions"]="";
$a->strings["Email/Mailbox Setup"]="";
$a->strings["If you wish to communicate with email contacts using this service (optional), please specify how to connect to your mailbox."]="";
$a->strings["Last successful email check:"]="";
$a->strings["IMAP server name:"]="";
$a->strings["IMAP port:"]="";
$a->strings["Security:"]="";
$a->strings["None"]="";
$a->strings["Email login name:"]="";
$a->strings["Email password:"]="";
$a->strings["Reply-to address:"]="";
$a->strings["Send public posts to all email contacts:"]="";
$a->strings["When enabled, suppress extraneous thread indentation while keeping it where it matters. Only works if threading is available and enabled."]="";
$a->strings["Your profile will be published in this node's <a href=\"%s\">local directory</a>. Your profile details may be publicly visible depending on the system settings."]="";
$a->strings["Your profile will be published in the global friendica directories (e.g. <a href=\"%s\">%s</a>). Your profile will be visible in public."]="";
$a->strings["Your contact list won't be shown in your default profile page. You can decide to show your contact list separately for each additional profile you create"]="";
$a->strings["Hide your profile details from anonymous viewers?"]="";
$a->strings["Anonymous visitors will only see your profile picture, your display name and the nickname you are using on your profile page. Your public posts and replies will still be accessible by other means."]="";
$a->strings["%1\$s is following %2\$s's %3\$s"]="";
$a->strings["Do you really want to delete this suggestion?"]="";
$a->strings["No suggestions available. If this is a new site, please try again in 24 hours."]="";
$a->strings["Ignore/Hide"]="";
$a->strings["Friend Suggestions"]="";
$a->strings["Tag(s) removed"]="";
$a->strings["Remove Item Tag"]="Ta bort tagg";
$a->strings["Select a tag to remove: "]="Välj vilken tagg som ska tas bort: ";
$a->strings["Export account"]="";
$a->strings["Export your account info and contacts. Use this to make a backup of your account and/or to move it to another server."]="";
$a->strings["Export all"]="";
$a->strings["Export your accout info, contacts and all your items as json. Could be a very big file, and could take a lot of time. Use this to make a full backup of your account (photos are not exported)"]="";
$a->strings["User imports on closed servers can only be done by an administrator."]="";
$a->strings["This site has exceeded the number of allowed daily account registrations. Please try again tomorrow."]="";
$a->strings["Import"]="";
$a->strings["Move account"]="";
$a->strings["You can import an account from another Friendica server."]="";
$a->strings["You need to export your account from the old server and upload it here. We will recreate your old account here with all your contacts. We will try also to inform your friends that you moved here."]="";
$a->strings["This feature is experimental. We can't import contacts from the OStatus network (GNU Social/Statusnet) or from Diaspora"]="";
$a->strings["Account file"]="";
$a->strings["To export your account, go to \"Settings->Export your personal data\" and select \"Export account\""]="";
$a->strings["You aren't following this contact."]="";
$a->strings["Unfollowing is currently not supported by your network."]="";
$a->strings["Contact unfollowed"]="";
$a->strings["Disconnect/Unfollow"]="";
$a->strings["[Embedded content - reload page to view]"]="";
$a->strings["Do you really want to delete this video?"]="";
$a->strings["No system theme config value set."]="";
$a->strings["The form security token was not correct. This probably happened because the form has been opened for too long (>3 hours) before submitting it."]="";
$a->strings["Examples: Robert Morgenstein, Fishing"]="";
$a->strings["Similar Interests"]="";
$a->strings["Random Profile"]="";
$a->strings["Invite Friends"]="Bjud in folk du känner";
$a->strings["Local Directory"]="";
$a->strings["Protocols"]="";
$a->strings["All Protocols"]="";
$a->strings["Saved Folders"]="";
$a->strings["Everything"]="";
$a->strings["Categories"]="";
$a->strings["%d contact in common"]=[
0=>"",
1=>"",
];
$a->strings["Post to Email"]="";
$a->strings["Hide your profile details from unknown viewers?"]="";
$a->strings["Connectors disabled, since \"%s\" is enabled."]="";
$a->strings["Visible to everybody"]="Synlig för alla";
$a->strings["show"]="";
$a->strings["don't show"]="";
$a->strings["Close"]="";
$a->strings["Welcome "]="";
$a->strings["Please upload a profile photo."]="";
$a->strings["Welcome back "]="Välkommen tillbaka ";
$a->strings["Could not find any unarchived contact entry for this URL (%s)"]="";
$a->strings["The contact entries have been archived"]="";
$a->strings["Enter new password: "]="";
$a->strings["Post update version number has been set to %s."]="";
$a->strings["Check for pending update actions."]="";
$a->strings["Done."]="";
$a->strings["Execute pending post updates."]="";
$a->strings["All pending post updates are done."]="";
$a->strings["The database configuration file \"config/local.config.php\" could not be written. Please use the enclosed text to create a configuration file in your web server root."]="";
$a->strings["You may need to import the file \"database.sql\" manually using phpmyadmin or mysql."]="Du kanske måste importera filen \"database.sql\" manuellt med phpmyadmin eller mysql.";
$a->strings["Please see the file \"INSTALL.txt\"."]="Se filen \"INSTALL.txt\".";
$a->strings["Could not find a command line version of PHP in the web server PATH."]="Could not find a command line version of PHP in the web server PATH.";
$a->strings["If you don't have a command line version of PHP installed on your server, you will not be able to run the background processing. See <a href='https://github.com/friendica/friendica/blob/master/doc/Install.md#set-up-the-worker'>'Setup the worker'</a>"]="";
$a->strings["PHP executable path"]="";
$a->strings["Enter full path to php executable. You can leave this blank to continue the installation."]="";
$a->strings["Command line PHP"]="";
$a->strings["PHP executable is not the php cli binary (could be cgi-fgci version)"]="";
$a->strings["Found PHP version: "]="";
$a->strings["PHP cli binary"]="";
$a->strings["The command line version of PHP on your system does not have \"register_argc_argv\" enabled."]="The command line version of PHP on your system does not have \"register_argc_argv\" enabled.";
$a->strings["This is required for message delivery to work."]="Det krävs för att meddelanden ska kunna levereras.";
$a->strings["PHP register_argc_argv"]="";
$a->strings["Error: the \"openssl_pkey_new\" function on this system is not able to generate encryption keys"]="Fel: funktionen \"openssl_pkey_new\" kan inte skapa krypteringsnycklar";
$a->strings["If running under Windows, please see \"http://www.php.net/manual/en/openssl.installation.php\"."]="Läs mer på \"http://www.php.net/manual/en/openssl.installation.php\" om du kör Windows.";
$a->strings["Generate encryption keys"]="";
$a->strings["Error: Apache webserver mod-rewrite module is required but not installed."]="Error: Apache webserver mod-rewrite module is required but not installed.";
$a->strings["Apache mod_rewrite module"]="";
$a->strings["Error: PDO or MySQLi PHP module required but not installed."]="";
$a->strings["Error: The MySQL driver for PDO is not installed."]="";
$a->strings["PDO or MySQLi PHP module"]="";
$a->strings["Error, XML PHP module required but not installed."]="";
$a->strings["XML PHP module"]="";
$a->strings["libCurl PHP module"]="";
$a->strings["Error: libCURL PHP module required but not installed."]="Error: libCURL PHP module required but not installed.";
$a->strings["GD graphics PHP module"]="";
$a->strings["Error: GD graphics PHP module with JPEG support required but not installed."]="Error: GD graphics PHP module with JPEG support required but not installed.";
$a->strings["OpenSSL PHP module"]="";
$a->strings["Error: openssl PHP module required but not installed."]="Error: openssl PHP module required but not installed.";
$a->strings["mb_string PHP module"]="";
$a->strings["Error: mb_string PHP module required but not installed."]="";
$a->strings["iconv PHP module"]="";
$a->strings["Error: iconv PHP module required but not installed."]="";
$a->strings["POSIX PHP module"]="";
$a->strings["Error: POSIX PHP module required but not installed."]="";
$a->strings["JSON PHP module"]="";
$a->strings["Error: JSON PHP module required but not installed."]="";
$a->strings["File Information PHP module"]="";
$a->strings["Error: File Information PHP module required but not installed."]="";
$a->strings["The web installer needs to be able to create a file called \"local.config.php\" in the \"config\" folder of your web server and it is unable to do so."]="";
$a->strings["This is most often a permission setting, as the web server may not be able to write files in your folder - even if you can."]="This is most often a permission setting, as the web server may not be able to write files in your folder - even if you can.";
$a->strings["At the end of this procedure, we will give you a text to save in a file named local.config.php in your Friendica \"config\" folder."]="";
$a->strings["You can alternatively skip this procedure and perform a manual installation. Please see the file \"INSTALL.txt\" for instructions."]="";
$a->strings["config/local.config.php is writable"]="";
$a->strings["Friendica uses the Smarty3 template engine to render its web views. Smarty3 compiles templates to PHP to speed up rendering."]="";
$a->strings["In order to store these compiled templates, the web server needs to have write access to the directory view/smarty3/ under the Friendica top level folder."]="";
$a->strings["Please ensure that the user that your web server runs as (e.g. www-data) has write access to this folder."]="";
$a->strings["Note: as a security measure, you should give the web server write access to view/smarty3/ only--not the template files (.tpl) that it contains."]="";
$a->strings["view/smarty3 is writable"]="";
$a->strings["Url rewrite in .htaccess is not working. Make sure you copied .htaccess-dist to .htaccess."]="";
$a->strings["Error message from Curl when fetching"]="";
$a->strings["Url rewrite is working"]="";
$a->strings["ImageMagick PHP extension is not installed"]="";
$a->strings["ImageMagick PHP extension is installed"]="";
$a->strings["ImageMagick supports GIF"]="";
$a->strings["Could not connect to database."]="";
$a->strings["Database already in use."]="";
$a->strings["Tuesday"]="tisdag";
$a->strings["Wednesday"]="onsdag";
$a->strings["Thursday"]="torsdag";
$a->strings["Friday"]="fredag";
$a->strings["Saturday"]="lördag";
$a->strings["January"]="januari";
$a->strings["February"]="februari";
$a->strings["March"]="mars";
$a->strings["April"]="april";
$a->strings["May"]="maj";
$a->strings["June"]="juni";
$a->strings["July"]="juli";
$a->strings["August"]="augusti";
$a->strings["September"]="september";
$a->strings["October"]="oktober";
$a->strings["November"]="november";
$a->strings["December"]="december";
$a->strings["Mon"]="";
$a->strings["Tue"]="";
$a->strings["Wed"]="";
$a->strings["Thu"]="";
$a->strings["Fri"]="";
$a->strings["Sat"]="";
$a->strings["Sun"]="";
$a->strings["Jan"]="";
$a->strings["Feb"]="";
$a->strings["Mar"]="";
$a->strings["Apr"]="";
$a->strings["Jul"]="";
$a->strings["Aug"]="";
$a->strings["Sep"]="";
$a->strings["Oct"]="";
$a->strings["Nov"]="";
$a->strings["Dec"]="";
$a->strings["poke"]="";
$a->strings["poked"]="";
$a->strings["ping"]="";
$a->strings["pinged"]="";
$a->strings["prod"]="";
$a->strings["prodded"]="";
$a->strings["slap"]="";
$a->strings["slapped"]="";
$a->strings["finger"]="";
$a->strings["fingered"]="";
$a->strings["rebuff"]="";
$a->strings["rebuffed"]="";
$a->strings["System"]="";
$a->strings["%s commented on %s's post"]="";
$a->strings["%s created a new post"]="";
$a->strings["%s liked %s's post"]="";
$a->strings["%s disliked %s's post"]="";
$a->strings["%s is attending %s's event"]="";
$a->strings["%s is not attending %s's event"]="";
$a->strings["%s may attend %s's event"]="";
$a->strings["%s is now friends with %s"]="";
$a->strings["Friend Suggestion"]="";
$a->strings["Friend/Connect Request"]="Vän- eller kontaktförfrågan";
$a->strings["New Follower"]="En som vill följa dig";
$a->strings["Error 400 - Bad Request"]="";
$a->strings["Error 401 - Unauthorized"]="";
$a->strings["Error 403 - Forbidden"]="";
$a->strings["Error 404 - Not Found"]="";
$a->strings["Error 500 - Internal Server Error"]="";
$a->strings["Error 503 - Service Unavailable"]="";
$a->strings["The server cannot or will not process the request due to an apparent client error."]="";
$a->strings["Authentication is required and has failed or has not yet been provided."]="";
$a->strings["The request was valid, but the server is refusing action. The user might not have the necessary permissions for a resource, or may need an account."]="";
$a->strings["The requested resource could not be found but may be available in the future."]="";
$a->strings["An unexpected condition was encountered and no more specific message is suitable."]="";
$a->strings["The server is currently unavailable (because it is overloaded or down for maintenance). Please try again later."]="";
$a->strings["Update %s failed. See error logs."]="";
$a->strings["\n\t\t\t\tThe friendica developers released update %s recently,\n\t\t\t\tbut when I tried to install it, something went terribly wrong.\n\t\t\t\tThis needs to be fixed soon and I can't do it alone. Please contact a\n\t\t\t\tfriendica developer if you can not help me on your own. My database might be invalid."]="";
$a->strings["Legacy module file not found: %s"]="";
$a->strings["Drop Contact"]="";
$a->strings["Organisation"]="";
$a->strings["News"]="";
$a->strings["Forum"]="";
$a->strings["Connect URL missing."]="";
$a->strings["The contact could not be added. Please check the relevant network credentials in your Settings -> Social Networks page."]="";
$a->strings["This site is not configured to allow communications with other networks."]="";
$a->strings["No compatible communication protocols or feeds were discovered."]="";
$a->strings["The profile address specified does not provide adequate information."]="Angiven profiladress ger inte tillräcklig information.";
$a->strings["An author or name was not found."]="";
$a->strings["No browser URL could be matched to this address."]="";
$a->strings["Unable to match @-style Identity Address with a known protocol or email contact."]="";
$a->strings["Use mailto: in front of address to force email check."]="";
$a->strings["The profile address specified belongs to a network which has been disabled on this site."]="";
$a->strings["Limited profile. This person will be unable to receive direct/personal notifications from you."]="Begränsad profil. Den här personen kommer inte att kunna ta emot personliga meddelanden från dig.";
$a->strings["Unable to retrieve contact information."]="Det gick inte att komma åt kontaktinformationen.";
$a->strings["Starts:"]="";
$a->strings["Finishes:"]="";
$a->strings["all-day"]="";
$a->strings["Jun"]="";
$a->strings["Sept"]="";
$a->strings["No events to display"]="";
$a->strings["l, F j"]="";
$a->strings["Edit event"]="";
$a->strings["Duplicate event"]="";
$a->strings["Delete event"]="";
$a->strings["link to source"]="länk till källa";
$a->strings["D g:i A"]="";
$a->strings["g:i A"]="";
$a->strings["Show map"]="";
$a->strings["Hide map"]="";
$a->strings["%s's birthday"]="";
$a->strings["Happy Birthday %s"]="";
$a->strings["Item filed"]="";
$a->strings["A deleted group with this name was revived. Existing item permissions <strong>may</strong> apply to this group and any future members. If this is not what you intended, please create another group with a different name."]="";
$a->strings["Default privacy group for new contacts"]="";
$a->strings["Everybody"]="Alla";
$a->strings["edit"]="";
$a->strings["Edit group"]="";
$a->strings["Create a new group"]="Skapa ny grupp";
$a->strings["Edit groups"]="";
$a->strings["activity"]="";
$a->strings["comment"]=[
0=>"",
1=>"",
];
$a->strings["post"]="";
$a->strings["Content warning: %s"]="";
$a->strings["bytes"]="";
$a->strings["View on separate page"]="";
$a->strings["view on separate page"]="";
$a->strings["[no subject]"]="[ingen rubrik]";
$a->strings["Requested account is not available."]="";
$a->strings["Requested profile is not available."]="";
$a->strings["\n\t\t\tDear %1\$s,\n\t\t\t\tThank you for registering at %2\$s. Your account is pending for approval by the administrator.\n\n\t\t\tYour login details are as follows:\n\n\t\t\tSite Location:\t%3\$s\n\t\t\tLogin Name:\t\t%4\$s\n\t\t\tPassword:\t\t%5\$s\n\t\t"]="";
$a->strings["Registration at %s"]="";
$a->strings["\n\t\t\tDear %1\$s,\n\t\t\t\tThank you for registering at %2\$s. Your account has been created.\n\t\t"]="";
$a->strings["\n\t\t\tThe login details are as follows:\n\n\t\t\tSite Location:\t%3\$s\n\t\t\tLogin Name:\t\t%1\$s\n\t\t\tPassword:\t\t%5\$s\n\n\t\t\tYou may change your password from your account \"Settings\" page after logging\n\t\t\tin.\n\n\t\t\tPlease take a few moments to review the other account settings on that page.\n\n\t\t\tYou may also wish to add some basic information to your default profile\n\t\t\t(on the \"Profiles\" page) so that other people can easily find you.\n\n\t\t\tWe recommend setting your full name, adding a profile photo,\n\t\t\tadding some profile \"keywords\" (very useful in making new friends) - and\n\t\t\tperhaps what country you live in; if you do not wish to be more specific\n\t\t\tthan that.\n\n\t\t\tWe fully respect your right to privacy, and none of these items are necessary.\n\t\t\tIf you are new and do not know anybody here, they may help\n\t\t\tyou to make some new and interesting friends.\n\n\t\t\tIf you ever want to delete your account, you can do so at %3\$s/removeme\n\n\t\t\tThank you and welcome to %2\$s."]="";
$a->strings["Fetch information like preview pictures, title and teaser from the feed item. You can activate this if the feed doesn't contain much text. Keywords are taken from the meta header in the feed item and are posted as hash tags."]="";
$a->strings["Please choose the profile you would like to display to %s when viewing your profile securely."]="Välj vilken profil som ska visas för %s när han/hon besöker din sida.";
$a->strings["Friendica Communications Server - Setup"]="";
$a->strings["System check"]="";
$a->strings["Check again"]="";
$a->strings["Database connection"]="";
$a->strings["In order to install Friendica we need to know how to connect to your database."]="";
$a->strings["Please contact your hosting provider or site administrator if you have questions about these settings."]="Please contact your hosting provider or site administrator if you have questions about these settings.";
$a->strings["The database you specify below should already exist. If it does not, please create it before continuing."]="";
$a->strings["Database Server Name"]="Database Server Name";
$a->strings["IMPORTANT: You will need to [manually] setup a scheduled task for the worker."]="";
$a->strings["Go to your new Friendica node <a href=\"%s/register\">registration page</a> and register as new user. Remember to use the same email you have entered as administrator email. This will allow you to enter the site admin panel."]="";
$a->strings["Item Guid"]="";
$a->strings["Create a New Account"]="Skapa nytt konto";
$a->strings["Password: "]="Lösenord: ";
$a->strings["Remember me"]="";
$a->strings["Or login using OpenID: "]="";
$a->strings["Forgot your password?"]="Har du glömt lösenordet?";
$a->strings["Website Terms of Service"]="";
$a->strings["terms of service"]="";
$a->strings["Website Privacy Policy"]="";
$a->strings["privacy policy"]="";
$a->strings["Logged out."]="Utloggad.";
$a->strings["%s's timeline"]="";
$a->strings["%s's posts"]="";
$a->strings["%s's comments"]="";
$a->strings["Bad Request."]="";
$a->strings["You may (optionally) fill in this form via OpenID by supplying your OpenID and clicking \"Register\"."]="";
$a->strings["If you are not familiar with OpenID, please leave that field blank and fill in the rest of the items."]="Om du inte vet vad OpenID är, eller inte vill använda det, kan du lämna det fältet tomt och fylla i resten.";
$a->strings["Your OpenID (optional): "]="OpenID (om du vill): ";
$a->strings["Include your profile in member directory?"]="Ta med profilen i medlemskatalogen?";
$a->strings["Note for the admin"]="";
$a->strings["Leave a message for the admin, why you want to join this node"]="";
$a->strings["Membership on this site is by invitation only."]="";
$a->strings["Your invitation code: "]="";
$a->strings["Your Full Name (e.g. Joe Smith, real or real-looking): "]="";
$a->strings["Your Email Address: (Initial information will be send there, so this has to be an existing address.)"]="";
$a->strings["Leave empty for an auto generated password."]="";
$a->strings["Choose a profile nickname. This must begin with a text character. Your profile address on this site will then be \"<strong>nickname@%s</strong>\"."]="";
$a->strings["Choose a nickname: "]="Välj ett användarnamn: ";
$a->strings["Import your profile to this friendica instance"]="";
$a->strings["Note: This node explicitly contains adult content"]="";
$a->strings["Registration successful. Please check your email for further instructions."]="Registrering klar. Kolla din e-post för vidare information.";
$a->strings["Failed to send email message. Here your accout details:<br> login: %s<br> password: %s<br><br>You can change your password after login."]="";
$a->strings["Registration successful."]="";
$a->strings["Your registration can not be processed."]="Det går inte att behandla registreringen.";
$a->strings["Your registration is pending approval by the site owner."]="Din registrering inväntar godkännande av webbplatsens ägare.";
$a->strings["At the time of registration, and for providing communications between the user account and their contacts, the user has to provide a display name (pen name), an username (nickname) and a working email address. The names will be accessible on the profile page of the account by any visitor of the page, even if other profile details are not displayed. The email address will only be used to send the user notifications about interactions, but wont be visibly displayed. The listing of an account in the node's user directory or the global user directory is optional and can be controlled in the user settings, it is not necessary for communication."]="";
$a->strings["This data is required for communication and is passed on to the nodes of the communication partners and is stored there. Users can enter additional private data that may be transmitted to the communication partners accounts."]="";
$a->strings["At any point in time a logged in user can export their account data from the <a href=\"%1\$s/settings/uexport\">account settings</a>. If the user wants to delete their account they can do so at <a href=\"%1\$s/removeme\">%1\$s/removeme</a>. The deletion of the account will be permanent. Deletion of the data will also be requested from the nodes of the communication partners."]="";