// Whether to use Memcache or Memcached or Redis to store temporary cache.
'cache_driver'=>'database',
// config_adapter (jit|preload)
// Allow to switch the configuration adapter to improve performances at the cost of memory consumption.
'config_adapter'=>'jit',
// curl_range_bytes (Integer)
// Maximum number of bytes that should be fetched. Default is 0, which mean "no limit".
'curl_range_bytes'=>0,
// crawl_permit_period (Integer)
// Period in seconds between allowed searches when the number of free searches is reached and "permit_crawling" is activated.
'crawl_permit_period'=>60,
// db_log (Path)
// Name of a logfile to log slow database queries.
'db_log'=>'',
// db_log_index (Path)
// Name of a logfile to log queries with bad indexes.
'db_log_index'=>'',
// db_log_index_watch (Comma-separated list)
// Watchlist of indexes to watch.
'db_log_index_watch'=>'',
// db_log_index_blacklist (Comma-separated list)
// Blacklist of indexes that shouldn't be watched.
'db_log_index_blacklist'=>'',
// db_loglimit (Integer)
// If a database call lasts longer than this value in seconds it is logged.
// Inactive if system => db_log is empty.
'db_loglimit'=>10,
// db_loglimit_index (Integer)
// Number of index rows needed to be logged for indexes on the watchlist. 0 to disable.
'db_loglimit_index'=>0,
// db_loglimit_index_high (Integer)
// Number of index rows to be logged anyway (for any index). 0 to disable.
'db_loglimit_index_high'=>0,
// dbclean_expire_conversation (Integer)
// When DBClean is enabled, any entry in the conversation table will be deleted after this many days.
// This data is used for ActivityPub, so it shouldn't be lower than the average duration of a discussion.
'dbclean_expire_conversation'=>90,
// dbclean-expire-limit (Integer)
// This defines the number of items that are to be deleted in a single call.
// Reduce this value when you are getting memory issues.
'dbclean-expire-limit'=>1000,
// diaspora_test (Boolean)
// For development only. Disables the message transfer.
'diaspora_test'=>false,
// disable_email_validation (Boolean)
// Disables the check if a mail address is in a valid format and can be resolved via DNS.
'disable_email_validation'=>false,
// disable_url_validation (Boolean)
// Disables the DNS lookup of an URL.
'disable_url_validation'=>false,
// disable_password_exposed (Boolean)
// Disable the exposition check against the remote haveibeenpwned API on password change.
'disable_password_exposed'=>false,
// disable_polling (Boolean)
// Disable the polling of DFRN and OStatus contacts through onepoll.php.
'disable_polling'=>false,
// dlogfile (Path)
// location of the developer log file.
'dlogfile'=>'',
// dlogip (String)
// restricts develop log writes to requests originating from this IP address.
'dlogip'=>'',
// free_crawls (Integer)
// Number of "free" searches when system => permit_crawling is enabled.
'free_crawls'=>10,
// frontend_worker_timeout (Integer)
// Value in minutes after we think that a frontend task was killed by the webserver.
'frontend_worker_timeout'=>10,
// groupedit_image_limit (Integer)
// Number of contacts at which the group editor should switch from display the profile pictures of the contacts to only display the names.
// This can alternatively be set on a per account basis in the pconfig table.
'groupedit_image_limit'=>400,
// hsts (Boolean)
// Enables the sending of HTTP Strict Transport Security headers.
'hsts'=>false,
// ignore_cache (Boolean)
// For development only. Disables the item cache.
'ignore_cache'=>false,
// instances_social_key (String)
// Key to the API of https://instances.social which retrieves data about mastodon servers.
// See https://instances.social/api/token to get an API key.
'instances_social_key'=>'',
// ipv4_resolve (Boolean)
// Resolve IPV4 addresses only. Don't resolve to IPV6.
'ipv4_resolve'=>false,
// invitation_only (Boolean)
// If set true registration is only possible after a current member of the node has send an invitation.
'invitation_only'=>false,
// like_no_comment (Boolean)
// Don't update the "commented" value of an item when it is liked.
'like_no_comment'=>false,
// local_block (Boolean)
// Used in conjunction with "block_public".
'local_block'=>false,
// local_search (Boolean)
// Blocks search for users who are not logged in to prevent crawlers from blocking your system.
'local_search'=>false,
// local_tags (Boolean)
// If activated, all hashtags will point to the local server.
'local_tags'=>false,
// max_batch_queue (Integer)
// Maximum number of batched queue items for a single contact before subsequent messages are discarded.
'max_batch_queue'=>1000,
// max_connections (Integer)
// The maximum number of database connections which can be in use before the worker process is deferred to its next interval.
// When the system can't detect the maximum numbers of connection then this value can be used. Use 0 for auto-detection.
'max_connections'=>0,
// max_connections_level (Integer 0-100)
// The maximum percentage of connections that are allowed to let the worker start.
'max_connections_level'=>75,
// max_contact_queue (Integer)
// Maximum number of queue items for a single contact before subsequent messages are discarded.
'max_contact_queue'=>500,
// max_image_length (Integer)
// An alternate way of limiting picture upload sizes.
// Specify the maximum pixel length that pictures are allowed to be (for non-square pictures, it will apply to the longest side).
// Pictures longer than this length will be resized to be this length (on the longest side, the other side will be scaled appropriately).
// If you don't want to set a maximum length, set to -1.
'max_image_length'=>-1,
// max_processes_backend (Integer)
// Maximum number of concurrent database processes for background tasks.
'max_processes_backend'=>5,
// max_processes_frontend (Integer)
// Maximum number of concurrent database processes for foreground tasks.
'max_processes_frontend'=>20,
// maximagesize (Integer)
// Maximum size in bytes of an uploaded photo.
'maximagesize'=>800000,
// memcache_host (String)
// Host name of the memcache daemon.
'memcache_host'=>'127.0.0.1',
// memcache_port (Integer)
// Port number of the memcache daemon.
'memcache_port'=>11211,
// memcached_hosts (Array)
// Array of Memcached servers info [host, port(, weight)], see Memcached::addServers.
'memcached_hosts'=>[
['127.0.0.1','11211'],
],
// min_poll_interval (Integer)
// minimal distance in minutes between two polls for a contact. Reasonable values are between 1 and 59.
'min_poll_interval'=>1,
// no_count (Boolean)
// Don't do count calculations (currently only when showing photo albums).
'no_count'=>false,
// no_oembed (Boolean)
// Don't use OEmbed to fetch more information about a link.
'no_oembed'=>false,
// no_smilies (Boolean)
// Don't show smilies.
'no_smilies'=>false,
// no_view_full_size (Boolean)
// Don't add the link "View full size" under a resized image.
'no_view_full_size'=>false,
// optimize_items (Boolean)
// Triggers an SQL command to optimize the item table before expiring items.
'optimize_items'=>false,
// paranoia (Boolean)
// Log out users if their IP address changed.
'paranoia'=>false,
// permit_crawling (Boolean)
// Restricts the search for not logged in users to one search per minute.
'permit_crawling'=>false,
// pidfile (Path)
// Daemon pid file path. For example: pidfile = /path/to/daemon.pid
'pidfile'=>'',
// png_quality (Integer)
// Sets the ImageMagick compression level for PNG images. Values ranges from 0 (uncompressed) to 9 (most compressed).
'png_quality'=>8,
// profiler (Boolean)
// Enable internal timings to help optimize code. Needed for "rendertime" addon.
'profiler'=>false,
// proxy_cache_time (Integer)
// Period in seconds after which the cache is cleared.
'proxy_cache_time'=>86400,
// pushpoll_frequency (Integer)
// Frequency of contact poll for subhub contact using the DFRM or OStatus network.
// Available values:
// - 5 = every month
// - 4 = every week
// - 3 = every day
// - 2 = twice a day
// - 1 = every hour
// - 0 = every minute
'pushpoll_frequency'=>3,
// queue_no_dead_check (Boolean)
// Ignore if the target contact or server seems to be dead during queue delivery.
'queue_no_dead_check'=>false,
// redis_host (String)
// Host name of the redis daemon.
'redis_host'=>'127.0.0.1',
// redis_port (String)
// Port number of the redis daemon.
'redis_port'=>6379,
// session_handler (database|cache|native)
// Whether to use Cache to store session data or to use PHP native session storage.
'session_handler'=>'database',
// remove_multiplicated_lines (Boolean)
// If enabled, multiple linefeeds in items are stripped to a single one.
'remove_multiplicated_lines'=>false,
// sendmail_params (Boolean)
// Normal sendmail command parameters will be added when the PHP mail() function is called for sending e-mails.
// This ensures the Sender Email address setting is applied to the message envelope rather than the host's default address.
// Set to false if your non-sendmail agent is incompatible, or to restore old behavior of using the host address.
'sendmail_params'=>true,
// show_global_community_hint (Boolean)
// When the global community page is enabled, use this option to display a hint above the stream, that this is a collection of all public top-level postings that arrive on your node.
'show_global_community_hint'=>false,
// show_unsupported_addons (Boolean)
// Show all addons including the unsupported ones.
'show_unsupported_addons'=>false,
// show_unsupported_themes (Boolean)
// Show all themes including the unsupported ones.
'show_unsupported_themes'=>false,
// throttle_limit_day (Integer)
// Maximum number of posts that a user can send per day with the API. 0 to disable daily throttling.
'throttle_limit_day'=>0,
// throttle_limit_week (Integer)
// Maximum number of posts that a user can send per week with the API. 0 to disable weekly throttling.
'throttle_limit_week'=>0,
// throttle_limit_month (Integer)
// Maximum number of posts that a user can send per month with the API. 0 to disable monthly throttling.
'throttle_limit_month'=>0,
// urlpath (String)
// If you are using a subdirectory of your domain you will need to put the relative path (from the root of your domain) here.
// For instance if your URL is 'http://example.com/directory/subdirectory', set urlpath to 'directory/subdirectory'.
'urlpath'=>'',
// username_min_length (Integer)
// The minimum character length a username can be.
// This length is check once the username has been trimmed and multiple spaces have been collapsed into one.
// Minimum for this config value is 1. Maximum is 64 as the resulting profile URL mustn't be longer than 255 chars.
'username_min_length'=>3,
// username_max_length (Integer)
// The maximum character length a username can be.
// This length is check once the username has been trimmed and multiple spaces have been collapsed into one.
// Minimum for this config value is 1. Maximum is 64 as the resulting profile URL mustn't be longer than 255 chars.
'username_max_length'=>48,
// worker_cooldown (Integer)
// Cooldown period in seconds after each worker function call.
'worker_cooldown'=>0,
// worker_debug (Boolean)
// If enabled, it prints out the number of running processes split by priority.
'worker_debug'=>false,
// worker_fetch_limit (Integer)
// Number of worker tasks that are fetched in a single query.
'worker_fetch_limit'=>1,
// worker_load_exponent (Integer)
// Default 3, which allows only 25% of the maximum worker queues when server load reaches around 37% of maximum load.
// For a linear response where 25% of worker queues are allowed at 75% of maximum load, set this to 1.
// Setting 0 would allow maximum worker queues at all times, which is not recommended.
'worker_load_exponent'=>3,
// xrd_timeout (Integer)
// Timeout in seconds for fetching the XRD links.
'xrd_timeout'=>20,
],
'experimental'=>[
// exp_themes (Boolean)
// Show experimental themes in user settings.
'exp_themes'=>false,
],
'theme'=>[
// hide_eventlist (Boolean)
// Don't show the birthdays and events on the profile and network page.
'hide_eventlist'=>false,
],
'jabber'=>[
// debug (Boolean)
// Enable debug level for the jabber account synchronisation.
'debug'=>false,
// lockpath (Path)
// Must be writable by the ejabberd process. if set then it will prevent the running of multiple processes.
